Mechanical behavior of a near α titanium alloy under dynamic compression: Characterization and modeling

Dynamic compression tests under strain rates from 870 s^?1 to 2100 s^?1 were conducted for a near α Ti–8Al–1Mo–1V titanium alloy with equiaxed microstructure. Compression behavior, adiabatic shearing and band microstructure were investigated via characterization and calculation. The results demonstrate that all dynamic constitutive curves exhibited obvious stress fluctuation phenomenon with double increase-decrease changing stages at the primary stage of compression. The dislocation multiplication theory can be used to explain this phenomenon. After the stress fluctuation period, work hardening coexisted with the thermal softening, resulting in the slow hardening tendency in constitutive curves. J-C model was utilized to quantify the dynamic constitutive curves. The deviations between the predicted and experimental curves under high strain rates may be attributed to the over-consideration of thermal softening effect in J-C model. Adiabatic shearing band (ASB) began to form under the strain rate of 2100 s^?1. A total shearing strain of 8.1 within ASB achieved in 8.9 μs, corresponding to a local strain rate of about 9.1 × 10⁵ s^?1 and is over 430 times of the macro strain rate. Post annealing was conducted on ASB before EBSD characterization. Due to the static recrystallization during annealing, the α phase within ASB generally presented as ultra-fine grains less than 1 μm in diameter.     

取用水监测点的水量计算与变化趋势分析

加强取用水监测是实施最严格水资源管理制度的重要举措.为了更有效地利用大量的取用水在线监测数据,需要对获取的监测数据进行预处理.本文首先提出应用中位数法与曲线拟合相结合的方法对取用水监测数据进行异常值检测,再用曲线拟合方法对异常值进行校正;其次,根据校正后得到的数据进行两个方面的分析,一方面是计算监测点的年取水量,另一方面是应用集成经验模态分解方法分析监测点的日取水量变化趋势;最后,以M市的16个自来水厂2016年取用水在线监测数据为例进行实证分析,结果表明,本文提出的中位数法与曲线拟合相结合的方法能够有效地检测异常值,进而再用曲线拟合方法能够更好地对异常值校正.根据校正后得到的数据进行分析发现81%的监测点年取水量相对2011年水利普查数据有所增加,个别监测点超出许可取水量较多,75%的监测点从春季到冬季日取水量变化为先增后减的抛物线趋势.     

Semi‐Structural Forecasting of UK Inflation Based on the Hybrid New Keynesian Phillips Curve

We develop a semi‐structural model for forecasting inflation in the UK in which the New Keynesian Phillips curve (NKPC) is augmented with a time series model for marginal cost. By combining structural and time series elements we hope to reap the benefits of both approaches, namely the relatively better forecasting performance of time series models in the short run and a theory‐consistent economic interpretation of the forecast coming from the structural model. In our model we consider the hybrid version of the NKPC and use an open‐economy measure of marginal cost. The results suggest that our semi‐structural model performs better than a random‐walk forecast and most of the competing models (conventional time series models and strictly structural models) only in the short run (one quarter ahead) but it is outperformed by some of the competing models at medium and long forecast horizons (four and eight quarters ahead). In addition, the open‐economy specification of our semi‐structural model delivers more accurate forecasts than its closed‐economy alternative at all horizons. Copyright © 2014 John Wiley & Sons, Ltd.     

一种新的维吾尔文字幕关键帧提取方法

为了快速有效地提取视频中含有维吾尔文字幕的关键帧提出一种新方法.该方法首先运用多尺度Harris角点检测,结合维吾尔文字笔画特点,完成字幕关键帧的初步提取;然后利用最小二乘法拟合直线,根据两条拟合直线的角度偏离情况对初步提取的结果作去冗余处理,得到最终字幕关键帧.实验结果表明:该方法快速简单,提取结果的准确率达到93%,具有很好的适应性.     

探究洛伦兹曲线模型及实例分析

利用洛仑兹曲线的特性,构造出新模型,证明了该模型满足洛伦兹曲线条件.并用实际数据进行验证,找出了五种洛伦兹曲线模型与之对比,发现新模型拟合效果非常显著,这一模型为更好地监控居民收入分配格局提供了较好的理论依据,具有一定的实际意义.     

城市创新能力的成长动力、成长曲线与驱动机制研究——基于213个城市面板数据的实证

城市作为区域发展的中心,集聚各类要素资源与经济社会活动,其创新能力的提升关乎城市经济发展、区域协调发展及国家可持续发展。本文基于以往的研究成果,采集我国213个地级及以上城市2007-2016年间的面板数据,运用时间序列分析、空间数据分析及多元回归分析等研究方法描绘了城市创新能力的成长曲线,对城市创新能力的成长动力与驱动机制进行了探索,得出各个解释变量均对城市创新能力产生了显著的正向影响,其中,创新人才变量驱动能力最强的结论。在此基础上,本文还揭示不同区域不同城市的创新能力驱动机制,对成长动力各个维度在我国不同区域不同城市中的驱动强度进行了验证。     

椭圆曲线y2=(x+a)(x2-ax+p)的大整数点

确定椭圆曲线的有理点(尤其大整数点)是数论与算术代数几何中十分有趣的问题。尤其椭圆曲线在密码学等方面的应用中,针对不同的情况,需要构造不同的椭圆曲线。本文在这类椭圆曲线y²=(x+a)(x²-ax+p)中找到了一族有大整数点的椭圆曲线。同时得到了这族椭圆曲线有整数解的充要条件,且给出了8条椭圆曲线的大整数点。     

三维三相单井数值模拟计算的程序设计

随着微型计算机的计算速度和存储量等性能的提高 ,采用计算机进行小型油藏数值模拟计算成为可能。本文建立了一个柱坐标系下的三维三相单井数值模拟模型 ,并编制了三维三相单井数值模拟计算程序     

草莓果酒发酵动力学模型研究

以草莓为原料,对其打浆后添加果酒酵母进行发酵.在发酵过程中测定菌体浓度、糖度以及酒精生成量.利用Logistic模型、Luedeking-Piret模型和Dose Resp模型,分别建立了酵母发酵的菌体浓度变化模型、糖变化及酒精生成量变化模型.结果表明,模型与实验数据能够较好地拟合,平均误差分别为3.56%、13.01%、11.07%,能够较好地反映草莓果酒发酵过程中酵母菌数、糖消耗及酒精生成量的动态变化.     

再生水脱氮工艺中碳源投加的优化研究

对某再生水厂两级生物滤池脱氮工艺的甲醇投加量进行优化,在2年的实际监测数据基础上,采用线性分析拟合得到甲醇投加量与进/出水总氮质量浓度、水处理量、日均温度等因素的相关方程,为一线工人确定精准投加甲醇量提供了便捷的操作指导。实际运行1年后,出水指标全部合格,甲醇-总氮去除比达4.16。采用以上优化措施降低了脱氮过程中甲醇的投用量,节约了甲醇投用成本。